Eclipse Strip Light
Our high-powered Eclipse Strip Light allows you to design a custom-length solution for your most difficult lighting challenges. For instance, use our range of warm white or natural white strips for mood lighting in ceiling troughs, under cabinets and breakfast bars.
IP20: SDCM < 3 (MacAdam)
IP65: SDCM < 4 (MacAdam)
L70 > 36,000h
L70 - 68,000h
24W / 60W / 150W
Please enquire for
The Eclipse Striplight can be cut every 50mm (RGB – 100mm).
IP65 is only suitable for Glide Series Extrusions.
CRI 90+ option available. Enquire for more information.
Warranty will be voided if LED strip is not used in conjunction with a surface mounted or recessed aluminium extrusion.
The Eclipse comes with adhesive tape. This ensures the longevity and performance of the LED strip.
Legacy LF10 (Flat Bar)
Available in 1000mm (LF101000.AL)
Legacy LR25 (Recessed)
Available in 1000mm (LR251000.AO) or 2000mm (LR252000.AO) option
Legacy LS18 (Surface Mounted)
Available in 1000mm (LS181000.AO) or 2000mm (LS182000.AO) option
Glide GR30 (Recessed)
Available in 1000mm (GR301000.AO) or 2000mm (GR302000.AO) option
Glide GS19 (Surface Mounted)
Available in 1000mm (GS191000.AO) or 2000mm (GS192000.AO) option
Glide GA27 (45°)
Available in 1000mm (GA271000.AO) or 2000mm (GA272000.AO) option
Glide67 GI20 (Recessed or Surface Mounted)
Available in 1000mm (GI202010.AO) or 2000mm (GI202020.AO) option
Glide67 GI25 (Recessed or Surface Mounted)
Available in 1000mm (GI252410.AO) or 2000mm (GI252420.AO) option
300mm Strip to 4-pin Solderless Connector
300mm Stip to DC Solderless Connecter (with cap)
Solderless L-Connector (Horizontal)
Strip to Strip Solderless Connector
300mm Strip to Strip Solderless Connector
300mm Strip to DC Solderless Connector (without cap – to suit Legacy Series)
2000mm 4-pin strip to strip connector
300mm 4-pin strip to strip connector
4-pin L-Joiner (Horizontal)
4-pin L-joiner (Vertical)
2000mm driver to 4-pin strip connector
300mm driver to 4-pin strip connector
Double headed adaptor for driver